Davey Torrium Controller

Torrium premium pump controllers for perfect, even pressure.
Manufacturer: Davey

Models: Torrium Controller TT45 –
Torrium Controller TT70

 

 

 

 

SKU: Torrium Controller. Categories: , , . Tag: .

WHY CHOOSE the Davey Torrium controller?

Constant Flow and Even Water Pressure
  • To prevent annoying fluctuations in water temperature during showers, Torrium®2  provides households with constant flow to give even water pressure.
  • It does this with its innovative pressure and flow sensors to start the pump on a pressure drop and to stop it on low flow (~1 lpm).
  • This avoids pump cycling when there is continuing household demand for water.
Quick Cut-in for Even Pressure
  • It gives you strong pressure right from the start, Torrium®2 is designed to cut in quickly when it senses demand for water. It cuts in when the pressure has dropped to 80% of the previous top (shut-off) pressure.
  • It uses its intelligence to automatically set this cut-in pressure each time the pump stops. It can automatically accommodate for variations in pump performance or site conditions.
Adaptive Starting
  • Torrium®2 can detect the difference between normal water demand and a small leak in the system, such as a dripping faucet or a leaking cistern.
  • For very low flows, Torrium®2 automatically adapts to reduce the cut-in pressure, which can be as low as 50% of its last shut-off pressure. This significantly reduces pump cycling to improve consumer satisfaction with the system.
  • If normal flow is required in the house (>0.5 lpm), Torrium®2 will sense this and revert to normal mode and initiate an immediate pump start.
Easy Status Check
  • Easily check the system status, Torrium®2 has three simple LED indicators:
    • Red LED – the system is in standby mode
    • Green LED – the pump is running
    • Yellow LED – fault condition
Pressure Indicator Window
  • Gives a quick guide to the system pressure
  • A colour band of mainly green indicates maximum pressure
  • Mainly red indicates low pressure
  • If the colour band moves slowly towards red this signifies a slow drop in pressure and may indicate a small leak.
Greater Hydraulic Performance
  • For better hydraulic performance to supply more pressure with less wasted energy, Torrium®2 has  no moving parts in the pathways. This performance versus loss equation is especially evident at higher flow rates.
Dry Run Protection and Auto Restart
  • To protect the pump from damage due to dry running, Torrium®2 stops the pump when it detects no water supply.
  • To reduce system downtime, the Torrium®2 waits 5 minutes then goes into auto retry mode.
  • An auto restart occurs at 5 minutes, 30 minutes, 1 hour, 2, 4, 8, 16 and 32 hours.
  • Torrium®2 will also restart if it detects flow through the system .
Pump Protection – High Water Temperature Cut-out
  • For added security and longer life, a water over-temperature cut-out provides a second level of protection against closed head operation and repetitive cycling.
  • For water temperatures above 70°C Torrium®2 will shut the pump down and the amber LED will be lit.
  • When the water temperature drops to below 60°C, the Torrium®2 will therefore allow the pump to restart.
Pump Protection – Excessive Electrical Current
  • Protect the pump motor, Torrium®2 will shut the pump down and indicate a fault if it detects excessive electrical current being drawn.
  • This occurs if the pump motor is subjected to locked rotor or if someone tries to manually override the Torrium®2 by continually holding in the prime button.
Corrosion and Scale Resistance
  • Allow Torrium®2 to be used with water of varying quality, its flow sensors are mounted on a high grade stainless steel plate with special anti-scaling electronic action, which only turns on during pump operation.
Extra Draw off Capacity
  • Accommodate small leaks and to reduce cycling, Torrium®2 has an in-built spring loaded accumulator for extra draw off capacity.
  • A spring loaded accumulator means low maintenance as there is no need for a pressure vessel with its regular air charging and checking.
  • For increased draw off, an optional pressure tank, up to 18 litres, can be mounted on the vertical outlet.
Power Surge Protection for Torrium®2
  • Protect the Torrium®2 controller from electrical surges and spikes, therefore extending its life, it has an in-built metal oxide varistor (MOV).
  • The status of the MOV can be checked in the viewing window on the back of the Torrium®2.
  • The MOV is a sacrificial component and therefore, should it be consumed because of repeated power surges or spikes, it will almost always blacken the viewing port. This will indicate a non-warrantable Torrium®2 failure.

Ease of Installation

  • Plumbing can be easily connected to either discharge outlet, therefore can rotate a full 360° for easy installation .

 

Download Brochure Here

Controller Type

Torrium Controller TT45, Torrium Controller TT70