Davey Submersible Vortex Pumps
High flow vortex submersible sump pumps with a choice of single or three phase motors. Open vortex impeller is less susceptible to blockage.
Suitable fluids are clean or “grey water” of neutral pH containing up to 20% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension.
Features
- Corrosion resistant 304 stainless steel shaft, motor shell and fasteners
- Open impeller, vortex, centrifugal design.
- Able to pump soft solids in suspension
- Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side
- Sand slinger lip seal
- Automatic resetting thermal overload
- HO7RNF oil resistant leads, 10 metres long with bared wire lead ends
- Mounting base fitted for a firm and stable positioning during installation and operation
- Slide rail kits available for easy removal and reinstallation
Applications
- Grey water pumping
- Sump emptying
- Septic effluent disposal
- Water transfer
- Pumping of light slurries and factory waste
Single Phase Models:
- D150V - 1.5kW
AEM also has a range of smaller Davey Portable Vortex Sump Pumps.
Three Phase Models:
- DT15V - 1.5kW
- DT22V - 2.2kW
- DT37V - 3.7kW
- DT55V - 5.5kW
- DT75V - 7.5kW
Pump Specifications
Maximum Flow:
2,500 Lpm
Maximum Pressure:
13.5 m head Motor Specifications
Power Output:
1.5 - 7.5 kW
Power Supply:
Single Phase, 240 Volt AC, 50 Hz
Power Supply:
Three Phase, 415 Volt AC, 50 Hz 