Davey Submersible Dewatering Pumps
Dewatering submersible sump pumps with a choice of single or three phase models.
Suitable fluids are clean or “grey water” of neutral pH containing up to 10% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension.
Applications
- Sump emptying
- Septic water disposal
- Water transfer
- Pumping of neutral, nonaggressive factory waste water
Features
- Open impeller, centrifugal design is able to pump small soft solids in suspension and less susceptible to blockage.
- Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side (D10 & D15 models have single seals)
- Sand slinger lip seal for added protection and long service life.
- Corrosive resistant 304 stainless steel motor shell and strainer.
- HO7RNF oil resistant leads with bare wire lead ends for easy connection to power supply terminations.
- High quality paint finish, attractive lasting appearance.
- Automatic resetting thermal overload.
- Low velocity inlet strainer fitted for firm and stable positioning during installation and operation. Also restricts pumping of solids which may damage or block the pump.
Pump Specifications
Maximum Flow:
1,950 Lpm
Maximum Pressure:
32.5 m head Motor Specifications
Power Output:
0.75 - 7.5 kW
Power Supply:
Single Phase, 240 Volt AC, 50 Hz
Power Supply:
Three Phase, 415 Volt AC, 50 Hz 