Davey Single Channel Sewage Pumps
High head single chanel sewage handling submersible sump pumps with a choice of single or three phase motors.
Suitable fluids are semi-screened sewage or “greywater” of neutral pH containing up to 20% small soft solids or 1% fine
solids. Some wear should be expected while pumping hard solids in suspension.
Features
- Corrosion resistant 304 stainless steel shaft, motor shell and fastener
- Open impeller, single channel, centrifugal design
- Able to pump soft solids in suspension
- Less susceptible to blockage
- Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side
- Sand slinger lip seal
- Automatic resetting thermal overload
- All units fitted with10m harmonized cable with bared ends
- Mounting base fitted for a firm and stable positioning during installation and operation
- Slide rail kits available for easy removal and re-installation
Applications
- Sewage water pumping
- Sump emptying
- Septic effluent disposal
- Water transfer
- Pumping of light slurries and factory waste
Single Phase Models:
- D75SA - 0.75kW
- D150S - 1.5kW
Three Phase Models:
- DT08S - 0.75kW
- DT15S - 1.5kW
- DT22S - 2.2kW
- DT37S - 3.7kW
- DT55S - 5.5kW
- DT75S - 7.5kW
Pump Specifications
Maximum Flow:
2,150 Lpm
Maximum Pressure:
32 m head Motor Specifications
Power Output:
0.75 - 7.5 kW
Power Supply:
Single Phase, 240 Volt AC, 50 Hz
Power Supply:
Three Phase, 415 Volt AC, 50 Hz 