Davey HM Series Pumps
Compact, all stainless steel horizontal multistage centrifugal pump and motor unit.
Horizontal multistage centrifugal pump with all hydraulic parts in stainless steel makes the HM range suitable for high water temperatures, as well as resistant to corrosion and wear.
Features
- Axial suction & vertical discharge for compact design and easy to install
- Stainless steel impellers with high efficiency impeller profile & thick self-centring impeller neck rings
- Impellers mounted directly on extended shaft to maximise performance per stage, ensuring high efficiency and long motor & pump life as well as increased wear resistance
- Pump casing assembly attached to motor bracket at 8 points with oring seal
- Complete stainless casing with superior sealing ensuring longer service life
- Davey built, totally enclosed fan cooled (TEFC) electric motor:
- Single-phase motors have built in thermal overload protection with automatic reset and 1.8m long power lead and Australian 3 pin plug
- Sealed and greased for life motor bearings
- Over sized motor drive bearing for longer life
- Easy to service design
- Economical & quiet running
- Automatic control options: Davey Torrium®, pressure switch or use the HM in single or multiple pump system
Applications
- Water supply, boosting & transfer
- Irrigation & turf watering
- Wash down
- Emptying/filling reservoirs or tanks
- Water treatment (demineralisation, filtering etc)
- Commercial washing equipment
For use in household pressure applications, see the Davey HM Pressure Systems and Davey RainBank Systems.
Suitable fluids
Clean, clear, non-corrosive, nonflammable liquids with no fibres and little sand/sillica or abrasives (maximum concentration 40g/m3).
Pump Specifications
Maximum Flow:
430 Lpm
Maximum Pressure:
65 m head Motor Specifications
Power Output:
0.58 - 2.5 kW
Power Supply:
Single Phase, 240 Volt AC, 50 Hz
Power Supply:
Three Phase, 415 Volt AC, 50 Hz 