Davey DC10M & DC10A Sump Pumps
These submersible dewatering sump pumps feature a double case, which means it can operate in partially submerged installations.
"A" suffix models are equipped with preset length float switch for automatic operation.
Suitable Fluids
Clean water of neutral pH containing up to 10% of small soft organic solids (<10mm OD). Some accelerated wear should be
expected while pumping hard solids in suspension.
Applications
- Domestic fountains or water falls
- Sump emptying
- Emergency flood relief
- Water transfer
- Pumping in partially submerged applications
Note: Not suitable for fish ponds or aquaculture.
Features
- Hard face silicon carbide / ceramic mechanical shaft seal in oil bath for added motor protection.
- Sand slinger lip seal for added protection and a long and reliable service life.
- Corrosion resistant 304 stainless steel fasterners for long service life and attractive, lasting appearance.
- Double case with full discharge flow past internal motor shell is able to operate in partially submerged installations and has better motor cooling for longer life.
- Automatic resetting thermal overload protects pump from overloading.
Need higher flowrate or pressure? Try the Davey DCS40M and DCS40A.
Pump Specifications
Maximum Flow:
80 Lpm
Maximum Pressure:
6 m head Motor Specifications
Power Output:
100 W
Power Supply:
Single Phase, 240 Volt AC, 50 Hz 